How to install model?
1. Install the base of the model, install the support of the model onto the base with screwdriver, tighten the screws for avoiding leaning.
2. Install the lower part: place one leg with hip onto the floor, then hold the waist of the model and install another leg of the model and turn it in 45ºdegree, install the lower part onto the base.
3. Install the upper part: connect the upper part with the lower part in 45ºdegree until tighten, then install the hands into arms in 45ºdegree until fit, then install two arms into shoulders.
How to dress the model?
1. Trousers: If the gap between two legs of the model is big, please remove one of the legs and dress it, then connect it back; do not remove the legs if the gap is not big.
2. Coat: Pullover : Put on clothes from head down, remove arms and dress the sleeves. Open Chest button Shirt : Remove one arm of the model, dress the sleeve of the coat onto the model, then remove another arm and dress the other sleeve(if fingers open wide,remove hands before put on clothes), finally install the arm onto the model.
3. Fasten and pull the zippers, tidy up the clothes.
How to maintain the model?
1. Please be careful when using the model, during combination or remove parts, the model should put on the soft place, hold softly, avoid crush, especially the knock the joint which will easily broken.
2. In Store : Due to the model is easily broken, please place the model beside the path in the store. If anyone crush on joints, that cannot be used.  
3. Do not display the model under direct sunshine, otherwise, the paint on it will fade(or bubbles appear).